Astra really can do electronic projects now!
一位用户在看到Chatgpt Astra kicad演示后，尝试使用Astra进行电子项目，并对此印象深刻。尽管由于每月20美元的OpenAI Plus订阅，用户只能使用最低设置，但他们在三小时内通过五次提示完成了设计，耗尽了使用重置次数。该用户将Astra目前的表现与2024年AI编码的水平进行比较，并对Astra未来一两年的发展充满期待。
- 发布
- 2026年9月7日 12:24
- 来源类型
- 开发者社区
- 档位
- 社区
- 信源状态
- 正常
时间以 UTC 显示
更多信息
I saw the Chatgpt Astra kicad demo, and wanted to try it out myself and im pretty damn impressed...! I only have a openai 20$/mo plus subscription so i had to use the lowest setting, but i got this design in 3 hours with 5 prompts in total before it ate up my 3 usage resets.
My only contributions to the design was to create the empty kicad template project, and the initial prompt:
"Lets test a esp32 design with a 24v input voltage which can output and read 4-20ma signals. Lets start planning!"
All design choices, component choices, design, schematics and, layout and documentation was done by the chatgpt astra 6 low through codex cli.
So final verdict? Its actually pretty damn usable.... Like, its not perfect by any means. some examples: There are a quite a few routing decisions i dont agree with, especially the USB routing and unneccesarry internal layer routing. The schematics are very hard to read as it doesnt use GND/Power symbols, and only use global labels instead of wires. But as far as i can tell from the schematic, this is a working design and i do agree with a lot of its component choices. But this was on its lowest effort setting with a 20$ subscription.....!
I feel it is pretty much where AI coding was in around 2024 (on its lowest setting), so im wondering where this will be in a year or two..!